Discussion Locked

missing or corrupt win2k files

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

i have win2k pro, when i boot it says
"the following file is missing or corrupt; \WINNT\SYSTEM32\CONFIG\SYSTEMced"
i attempt to repair by using the original setup on CD and select "r" @ the first screen to start the repair. i did this about 5 or 6 times but still was unable to boot. what can i do to boot win2k?

1 reply

by raffi_

Hello.

This error is caused because the System hive in the registry is damaged or missing.
You said that you have already run the Repair option but please try the following (from the MS KB)

After you log on to the Recovery Console tool, type the following commands:
cd system32\config
ren system system.old
ren system.alt systemalt.old
After you type the commands, copy the backup of the System hive from either the %SystemRoot%\Repair folder or the %SystemRoot%\Repair\Regback folderif you run the Emergency Repair Disk Wizard from Windows 2000 Backup and Recovery tools.

IMPORTANT: You need to restore the most recent copy of the System hive. Any programs that run as a service or hardware device drivers that you installed since you last ran the Emergency Repair Disk need to be re-installed.

To copy the default System hive, type:
copy c:\winnt\repair\system' to copy the default system hive
To copy the System hive that was backed up the last time that you ran the Emergency Repair Disk Wizard, type:
copy c:\winnt\repair\regback\system
After you do this, type exit at the command prompt. This restarts your computer.

If this fails I would strongly suggest that you need to re-install the OS from scratch.

Regards
Raffi_

This discussion is closed to new replies.