Discussion Locked

Modem Installed wrong?

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
My modem says it's communicating but it doesn't want to connect. The dialer connects ALMOST then, the error message opens 691. I have checked and rechecked the password and ID but that is not the problem. The modem used to work before I switched to cable, then when switching back the driver had to be downloaded. The computer store returned it without making sure it connects and although I know it should from previous use, they suggested it may be a bad modem?? The baud rate seems low (although this is just a guess..the phone cord length...ect.). I have tried to figure out what could be set wrong such as the phone, port, ect. and can't quite get it myself. Thanks.

5 replies

by horseheart

Contact the manufacturer for technical assistance. Some modems cannot use com 2 and also need special settings. If you do not want to do that I suggest removing the modem in control panel, all software, remove from computer pci slot, restart system,shutdown, install in different pci slot. In cmos you can disable com 2 so it assigns another. But like I said it depends on the manufacturer specs.

by tsimmo67

I had a problem similar a while ago. What had happened we never did find out, but we think that a power blackout fried it. The best thing to do is to try it on another computer.
Anothe rthing is if it is PCI it may have come loose some how
-Travis

This discussion is closed to new replies.