Discussion Locked

modem not connecting

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am getting error 630 that my modem is not installed properly

9 replies

by kerry.howard

In device manager delete the modem restart the computer and install the moden again sometims settings change and it interupts the current configuration. This normally fixes this problem as long as your drivers fort he modem are compatible to your operating system

by kerry.howard

In device manager delete the modem restart the computer and install the moden again sometims settings change and it interupts the current configuration. This normally fixes this problem as long as your drivers fort he modem are compatible to your operating system

by grump

Open control panel double click on the yellow telephone icon and remove the modem, in fact if you only have one modem in the computer remove all the modems you see listed there.. Next in control panel double click on the system icon and select device manager.. click the refresh button in the middle of the dialog box.. If you still get the 630 error check to see if the correct modem drivers are being utilized..
PNP is an acronim for Plug aNd Play but like I said it is just an acronim and not a true fact...

by joeydawop12

First you should try uninnstalling your modem through device manager ..Restart your puter and reinstall it ...if that doesnt help try to simply open your case physically remove the modem and reseat the card..sometimes they jiggle loose during a moveor rearrangment of your home.
Good luck

This discussion is closed to new replies.