Question Locked

Monitor has power but no display and light blinks!!!

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Ny CRT monitor ligt is green and blinking but no display, a sound of kit kit... is with the light blinking.... plz help me in this problem...

5 replies

by oh smeg

If it still doesn't work the Video Card has come loose and you'll need to open the case and refit the Video Card.

Col

by markp24

HI

the video resolution setting may be out of range

Try booting in safe mode see if that works

by jpmyers15

If the above suggestions do not help, try replacing the power cord if you have one. Definitely check out that video card to make sure it's secure in its slot, like the other person suggested.

by g_kruger

As above comments suggested, the blinking light tells you there isn't any video input. Check video cable connections and make sure video card is seated in it's slot. If that's all right, it's probably a bad video card. Of course I'm assuming that the computer is actually running OK. You should have power light on and hard drive light should flicker when you first turned it on, otherwise it could be a dead computer.

This discussion is closed to new replies.