Question Locked

Monitor not working

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Have LG monitor. attached to UPS supply. When powered on the monitor BLINKS once and then goes blank.
Everything else is working fine [CPU, Speaker etc]
Plz. suggest some solution

Thanks a lot

6 replies

by ameack

As suggested ..
connect it into a Power supply other than UPS, also do check if its connected to a DVI or VGA connector. In that case you might have to choose the AUTO setting on the monitor.
If still nothing comes try connecting to another PC or laptop.

by patb071

It is also possible for video card could be bad. Is it a built in video card?

by jfuller05

you could always trade the out cables you're using.

Bad cables can be easy fixes.

by markp24

Hi

try connecting it to a system using 800 x 600 or 640 x 480 resolution. The monitor may not handle the resolution the computer is using.
Also check for bent pins on the VGA or DVI cable, , if its a video card, you may want to reseat the card.
If the monitor has DVI and VGA you may want to confirm the source is set correctly (VGA/DVI/Composite/SVIDEO) from the monitor menu.

This discussion is closed to new replies.