10 replies
by a_kll_ezz Accepted solution
by thumbsup2 Accepted solution
by lcristof Accepted solution
by david.wallis Accepted solution
is the pc posting? do you get post beeps?
there are a number of reasons the monitor may not work..
if the system isnt posting -
1) the board could be faulty
2) the cpu may not be compatible
3) the ram may not be compatible
4) you may have the jumper set to clear the cmos in which case it wont post :)
5) the psu might not be good enough, whats the power rating of it?
by david.wallis Accepted solution
list the make model of your
1) RAM
2) Motherboard
3) CPU
:)
by mich147 Accepted solution
1)DDR3 Patriot Ram
2)I Core 7 processor
3)Gigabyte Ultra Durable 3: EX58-UD3R (MB)
by balge Accepted solution
hi
you did check the BIOS is set to use the onboard graphics?
cheers?
by mich147 Accepted solution
by balge Accepted solution
wasn't replying to you was replying to OP, on autopilot...
It's not considered good form resurrecting old threads btw, easier to start a new one.
FWIW try pressing 'del' next time you're halfway through a 'POST' ...
cheers
by paldebayan Accepted solution
i have the same problem...my monitor does not display anything...but the computer is workin fine....i was readin the posts here...tried out everything...openend and re assembled everything....
then i got angry and slapped on the side of my monitor...and for 5 seconds it turned on...and again the same thing...no display anymore...i tried slapping but it dint work anymore....so i guess its got to do somethng with the monitor....m gonna get it changed tmrw...
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending