Discussion Locked

Monitors Blurry after upgrade to XP

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We have recently rolled out an XP operating system upgrade to about 30 machines. Of those around 6 users have complained about a blurry strip down the center of thier screens.

Sure enough, each have a section down the middle, about 1/3 screen width, which is out of focus. The left and right edges are normal.

Monitors are recent IBM 17" CRT's and were working perfectly until the software upgrade.

I've tried playing with refresh rates and resolution with no effect. XP picks up the monitors as plug and play and IBM don't offer XP drivers.

Of note the on screen displays are complely in focus.

4 replies

by Member 23567752

Chipsets are nVidia Riva TNT2, latest drivers from XP "update drivers" and nVidia didn't change anything.

The PC's should be identicle (same batch and Ghosted)and as it's only effected a few, I'm doubtful if drivers are to blame. Also of note, I can swap in another monitor of the same type in and all will be fine, with the blurry monitor still performing bad on the second PC.

This discussion is closed to new replies.