Discussion Locked

Motherboard dead or alive?

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I having discussion with a ,use to be prominant Sevice Technician, from the early 80s who is now cashing on his programming skills ,that a dead or dieing motherboard can still produce a blinking cursor on the screen. You get no error messages on the monitor. I thought a dead motherboard produced no video at all. The system in quesion does not beep, but intermittently shows a blinking curser. They are going to replace the motherboard.

5 replies

by george_koitchev

It depends on which part of the motherboard is dying. The PC/XT computer has a separate blinking generator on the mainboard. I suppose that the modern computers have it integarted within some of the chipset chips, because you can set the blinking rate through BIOS. But you are saying that the MB is dead and produces video however. What exactly is the deffect you call "death"?

by cosloot

Always a good point. I guess I call a motherboard dead when it is the part I have to replace. We now have all the FDD, HDD and I/O ports integrated on the motherboard and can include sound, video,. This motherboard shows only that blinking cursor, it is four or five years old with a Intel 233. I would now pronounce that dead with your imput. This must have been what Dirk was thinking about. I have only been servicing computers since the 486-25 days and did not totally get in to it until the last year. Thanks for your imput I do remember that now, I started selling computers in 1984. Dirk wins the bet.

by george_koitchev

Try updating the BIOS if the MB has flashable BIOS. If there is a FDD activity, you can prepare a boot disk containing a flash command in the autoexec (the exact syntax depends on the flash program). If no disk activity, try hotswap. It is better toremove all cards before flashing and put an ISA video card (if available). If BIOS not flashable try changing it.

by george_koitchev

Try updating the BIOS if the MB has flashable BIOS. If there is a FDD activity, you can prepare a boot disk containing a flash command in the autoexec (the exact syntax depends on the flash program). If no disk activity, try hotswap. It is better toremove all cards before flashing and put an ISA video card (if available). If BIOS not flashable try changing it.

This discussion is closed to new replies.