Discussion Locked

MS-Dos PC loses drive connection to NT 4

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a NT 4.0 server w/SP5 running TCP/IP and IPX protocol. I have a MS-DOS pc that logins to the NT server using the NT DOS client and IPX protocol. This PC logins in without a problem. This PC handles an update process to the accounting database on the NT server at night. What happens occasionally in the morning is that I get an error that tells me the PC has lost connection to the server and the update process stops. I have replace the NIC and Pentascan the cables. I have no problemslogging in or connecting to the server. Does anyone have any ideas on what might be going on??

3 replies

by jcparkerconsulting

Is there an auto maintence program, such as a defrager, or Backup program (Full system backup) which may be running at the time the update occurs? If under normal conditions the workstation connects with out problems, and you have checked the cables you really only leave tow prime suspects.

1. A service or process running on the NT server which disables the login service. Such programs as Disk Defragmentors, and Backup Programs will do this. They do not effect Windows Programs since they maintain a persistant connection (auto reconnect - not available with DOS).

2. Possiable power outage/brownout occuring at the HUB/SWITCH if they are not on a UPS. Or to the Workstation (It is assumed that a server will have UPS protection).

Toubleshooting Steps:

Get a non battery backup Clock and plug in with workstation and HUB/Switch. Next time this happens see if time is off.

Review NT event log for indications. If you set log to high detail, and log all events (this will fillup a HD if you do no

This discussion is closed to new replies.