Discussion Locked

MS EXCHANGE 5.5 SERVER INFORMATION STORE

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

In our organization we are using MS EXCHANGE 5.5 and outlook 97 as clients. Previously we loaded Exchange server in Compaq Prosignia 200 server with 4.1GB STORAGE SPACE with backup device (2/4GB HP 4mm tape). In that server our information storage exceeded the
the storage limit.To increase the storage space we added new HDD with 18 GB capacity.
Before installing the new Hard Disk we took
on line NT Backup for the exchange server.
After the installation of new Hard Disk, we
installed NT, NT SERVICE PACK and then installed MS EXCHANGE SERVER with same company name , Machine name, Drive name and Site name.
After the installation we restored the Directory information,Information Store
and other *.edb files.
After recovery of the abovedata we started
the MS EXCHANGE 5.5 ADMINISTRATOR. It gives the error as follows
Microsoft Exchange Administrator
ID NO: c103565f
ID NO: c1030ad1
Failed to contact server
Verify that the MS Exchange services are started in the machine
ds_e_insufficient_acess_rights

While trying to start the exchange services
it is giving following errors.
"could not start the Information Store service on \\exchange_server
error 2156"

With the online backup and the setup is it possible to recover our Organisation's information store functionally? Can you suggest some online backup recovery tips.

M.Sriram
System Administrator
ms@bdwt.com

3 replies

by tony.colgrove

Was this also a PDC? For the services to start you need to use the exact (SID and all) service account to successfully restore and restart the exchange services. If it was the PDC and you reinstalled it, you lost the SID for the service account.
If this is the case-- dont worry all is not lost. Uninstall Exchange. Reinstall with same org, site, and computer names as before. Start the directory service, and only restore the priv.edb, and pub.edb. Run isinteg -patch then start the information store. Open up Exchange Admin, (you will notice you have no mailboxes) drill down to the server and click properties. On the advanced tab click the button for the Consistency Adjuster. Check all the boxes and let it rip! It will replace all the mailboxes into the directory (dir.edb). You will need to create and associate the mailboxes to NT account, but the directory export and import tool can do that.
Best of luck.

by ms

The above option is suitable for off-line backup.I restored the online data and then apllied edbutil patch for repairing and recovering the information store.After that I applied isinteg patch as per his suggestion.
Now we are working with the old database.

This discussion is closed to new replies.