Discussion Locked

MSDOS compatability mode

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I teach a computer group in the retirement village in which I live. One of our members has been getting an undue amount of "this has caused an illegal operation and will be shut down". After a while messages start popping up when printing or moving files that reads "Some drives are operating in MSDOS Compatibility Mode" or something to that effect. A check of the Microsoft FAQ's shows article Q130 entitled MSDOS Compatibility mode. The solutions offered there did not work.

Do you have any suggestions. The OS is Win95B and is a Gateway, 166MHz OEM computer.

9 replies

by rogueldr

That occurs with some older drives and cd-rom's. The only thing you can do is update the drivers. If the most current driver does not solve the problem then about the only choice is to upgrade the hardware. If your checking for current drivers try to find 32 bit drivers for your devices for the hardware. Also make sure that your motherboard bios is up to date. Without knowing what the Microsoft FAQ said I can't give much more advice at this point.

by crennaker

The drive was updated because of running out of space using the drive software. Re-installed the OS using the Gateway restore disk.

by baziite

Please go to control panel / system / devices and pin point the device that is running in compatibility mode . It will have a"!" besides it . IF it is a hard disk it could be an out of date driver or it could even be a bad hard disk . you can go to the perfomance tab in the systems applet and disable certain enhanced features of the hard disk . But before you do that restart the system , go to the Bios and reduce the PIO mode of the harddisk one level at a time . this might be a temporary fix and will slow down performance .you will eventually have to update your driver or change your drive .

by jun1cez1

The quick solution to this problem is in the win95b disc itself. Look for the file NOIDE.INF in the tools section, right click the file then choose install and then reboot the PC. You're done. Now if the problem was kind of worse than that, then you're only solution is to re-format the hdd.

by saihib

Run regedit. Do a search of the registry for "noide" without the quotes. If found, delete the registry entry and reboot. If still running in compatibility mode try deleting your hard drive controller and rebooting and let Windows re-enumerate it.

This discussion is closed to new replies.