Discussion Locked

MsProxy2.0 setting

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We are setting up proxy in that we added two interface card, so we need to settingup RIP on both the cards?For One card we given static IP address, what about the other? DHCP is enough or we have to give dumy IP address? Please inform me soon?

8 replies

by ntoz

1. RIP? Are you going to use it as a router also? Otherwise why RIP? Even if your using Proxy, you should have a real router on the other side.
2. Both cards should be static, inside should be a private ip address and the outside should be your "hot" or public IP address.

by vichu

obviously,we want proxy should rout and we had real router also.

Second Point i can't understand. See we have 203 series IP address given by ISP ok. We set a proxy like given 203 series IP address to the inbuilt NIC of the proxy server and weadd an another NIC to the proxy server given a IP address as 172 series which dumy IP address. Is it work or what?

by curlergirl

You should never use DHCP to assign IP addresses to a server. All server IPs should be static. I'm assuming that you are connecting to the Internet through a router or DSL modem - some type of connection that is on all the time. The NIC that is connected to the Internet router or DSL modem is assigned your public IP address (i.e., one that is assigned to you by your ISP). The NIC that is connected to your internal network must be given a static IP address within the network and subnet mask that you are using on your internal network. The external NIC must use the gateway address given to you by your ISP. The internal NIC must be set up with NO GATEWAY (must be blank, not 0's). You don't need RIP. Hope this helps!

by vichu

Everything is ok. 203 series IP address is given by ISP. we want to know is need to give a 203 series IP address to the internal NIC and external NIC or 203 series IP address to external NIC and dumy IP like 172 series IP address to internal NICwithout any gateway i'm right.

by curlergirl

To follow up on your questions re: 203 addresses and 172 addresses. The "203 address", from what you said, is from the range of IP addresses given you by your ISP. The NIC card using this address must use the external gateway address. The other network card must be connected to your internal network in some way - through a hub or switch - and must use an address in the same subnet as your internal network. If your internal network is set up to use a scope of addresses starting with 172, as you mentioned, then this would be the address given to your internal NIC - 172.x.x.x, the values in the "x" depend upon what your internal scope is. (You haven't mentioned in your postings what your internal scope consists of so I can't be more specific.) This NIC would have no gateway address, as I mentioned before. There is nothing else you need to do, except be sure your clients are set up properly to use the Proxy Server to access the Internet. If you still are confused about this, please respond with additional details - such as, what range of IP addresses are you using for your internal network?

by vichu

We have done all that. Our internal ip range is 172.17.x.x

No gateway specified on internal nic
default gateway is given on the external nic

RIP is enabled on the interfaces. We tried taking off RIP. Still same result.

by joshg

Give both NIC's a static IP, one is from your ISP and the other your internal "Dummy" make sure the internal is the same subnet that the clients will be on. Turn on RIP so that when a client talks to the 172 NIC for INET access it will get forwarded to the 203.

Next only specify a Default Gateway on the 203 NIC. In order for Proxy to work it has to have a DNS server to query. Make sure one is specified.

by joshg

To clarify, the External NIC is the NIC that gets the ISP provided IP (203). The internal NIC is the Private IP (172).

This discussion is closed to new replies.