Windows Forum

Ask something
Discussion Locked

multihomed

0 helpful
7 replies

by jmccorma

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am trying to set up a multihomed computer.
When I put in the three NIC cards, and check the IRQ's, they all have the same - 11. Do I need to change these and how do I change the IRQ in NT 4? They are newer 3com cards. I have gone to the Network icon and selected adapter properties, but when I click on properties, nothing happens!

7 replies

by shawn.tooley

I have seen this exact problem before with 3Com NICS (any model). The only way I could find around it was using a NIC other than 3Com. Try Intel or LinkSys. Sorry I could not find a fix.

Shawn

by aenezi

You need to update the BIOS first then try to control the Interrupt address from the BIOS. I've work on this several times and it was work perfect

Al-Enezi

by aenezi

You need to update the BIOS first then try to control the Interrupt address from the BIOS. I've work on this several times and it was work perfect

Al-Enezi

This discussion is closed to new replies.