Discussion Locked

Multiple trys for successful logon

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Recently, various users are unable to logon to the server (NT) on the first try. The users will have to type their password several times for a successful connection. And it is not always the same users. Each workstation runs Win98/SE. We have approximately 55 users.

I done a variety of recommended fixes and checks at the workstation. Ping testing to the server, shut-down the server, reset the hubs(3Com), reset the switches (hp).

Anyone have any ideas of what else to try.

Thanks

6 replies

by zchris

look into the manual of the switch.

but a good hint is to make a telnet-session to the switch. (telnet "ip-adress"). look after a menu like "configuration" or "setup". i bet you'll find an entry for "spanning tree".

good luck

by rachel_s

The first question I have is do you have a WINS server and is it configured for the Domain. If you do not, everyone is broadcasting to find the domain. LMHOSTS files would be another answer but hard to maintain.
Install a WINS server and/or configure the domain option with your PDC first and any/all BDC's IP address. This will be under the static entries.
Configure their NAME to IP address also.

This discussion is closed to new replies.