Have you run the Dell Diagnostics yet. After you do work your way through this.
Userinit may have been damaged so you can replace it with these instructions. Overwrite the file if necessary.
Insert the XP CD and reboot the computer. You may need to configure your computer to boot from the CD-ROM drive.
When the Windows XP Setup has started, press "R" to "repair the Windows XP installation using Recovery Console".
Select the Windows installation to repair (generally this is C:\Windows) by typing its number and then pressing ENTER.
Type the Administrator password and press ENTER.
Type the following commands: and press Enter after each.
D:
CD I386
EXPAND USERINIT.EX_ C:\WINDOWS\SYSTEM32
NOTE: If your CD-ROM drive has a different letter assigned to it, enter "X:" instead, where X is the appropriate drive letter.
After entering "EXPAND USERINIT.EX_ C:\WINDOWS\SYSTEM32" you should see the text "1 file(s) copied", in which case all went well.
Remove the Windows XP CD, type "EXIT" and press ENTER to restart your computer. You should now be able to log on as normal.
"WARNING MODIFYING REGISTRY INFORMATION IS DANGEROUS"
Backup the Key before making changes by right clicking the Key and select Export.
Press ctrl+alt+del and then go to file, start process, and start explorer.exe and then your desktop should show up
Click Start, Run and type regedt32 and press Enter.
Navigate to: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\winlogon\
You will have to set the Shell variable in the right hand pane by right clicking and select Modify. It should = Explorer.exe
Now, check the USERINIT value in the registry
In the right-pane, check that the value of Userinit is equal to C:\WINDOWS\system32\userinit.exe,
Type the above value exactly as given, including the comma if it is different.
Follow the steps below with the System started and restarted in Safe Mode with Networking if you are now able to access Safe Mode. Running in Safe Mode loads a minimal set of drivers for the Operating System. You can use these options to start Windows so that you can modify the registry or load or remove drivers.
With the new strains of Virus that have been created you may find it necessary to rename the executable files so that they will work. Rename mbam-setup.exe and then navigate to the install folder and rename mbam.exe. Do not change the files extension from .exe. Do the same with Spybot.
Removing malware from System Restore points
To remove the malware, you must first disable System Restore, then scan the system with up-to-date antivirus software - allowing it to clean, delete, or quarantine any viruses found. After the system has been disinfected, you may then re-enable System Restore. The steps for disabling System Restore vary, depending on whether the default Start Menu or the Classic Start Menu is being used.
Default Start Menu XP
If using the default Start Menu, click Start | Control Panel | Performance and Maintenance | System. Select the System Restore tab and check "Turn off System Restore".
Classic Start Menu XP
If using the Classic Start Menu, click Start | Settings | Control Panel and double-click the System icon. Select the System Restore tab and check "Turn off System Restore".
Vista
Start, right mouse click Computer and select Properties. Select Advanced System Properties, click contine and then System Protection. Untick the box nect to Local Disk C: and click on Turn System Restore off.
After scanning the system and removing the offending malware, re-enable System Restore by repeating the steps, this time removing the check from "Turn off System Restore".
Download Malwarebytes Anti-Malware, install it and update it.
Malwarebytes
* Double-click mbam-setup.exe and follow the prompts to install the program.
* At the end, be sure a checkmark is placed next to Update Malwarebytes' Anti-Malware and Launch Malwarebytes' Anti-Malware, then click Finish.
* If an update is found, it will download and install the latest version.
* Once the program has loaded, select Perform Quick Scan, then click Scan.
* When the scan is complete, click OK, then Show Results to view the results.
* Be sure that everything is checked, and click Remove Selected.
If you encounter any problems while downloading the updates, manually download them from here and just double-click on mbam-rules.exe to install.
mbam-rules
I would keep scanning with it until it is clean by closing out and rebooting and running it again.
Download Spybot - Search & Destroy and install it. Update it and run it.
Spybot
Also run this Rootkit Revealer GMer
http://www.gmer.net/index.php
FAQ
http://www.gmer.net/faq.php
Just to be on the safe side when you finish do an online scan with Bitdefender or Google for an online scanner.
http://www.bitdefender.com/scan8/ie.html
As a last resort try this if the above doesn't help.
Click Start, Run type msconfig and press Enter.
Now if you have the Configuration Utility open.
Configure selective startup options
In the System Configuration Utility dialog box, click the General tab, and then click Selective Startup.
Click to clear the Process SYSTEM.INI File check box.
Click to clear the Process WIN.INI File check box.
Click to clear the Load Startup Items check box. Verify that Load System Services and Use Original BOOT.INI are checked.
Click the Services tab.
Click to select the Hide All Microsoft Services check box.
Click Disable All, and then click OK.
When you are prompted, save the settings and restart the System.
When the System is working properly re-run the Configuration Utility and in the System Configuration Utility dialog box, click the General tab, and then click Normal Startup.
Now you will have to re-enable each item or do up to three at a time to see what is causing it.