11 replies
by paracosmos Accepted solution
by oh smeg Accepted solution
If you did I would suggest trying it in another USB Port or try another Lead. If it has a Y Cable you need to plug both of the USB Plugs into the Computer.
The Y lead has a Power Plug and a Power & Data Plug and if the computer is a NoteBook them most likely the HDD doesn't have enough Power to actually run the drive properly. If there is no Y lead involved but you have a External Power Supply I would suggest trying the External Power Supply in another Socket. It's not unknown for Plug Boards to have individual sockets fail.
Col
by paracosmos Accepted solution
by rob kuhn Accepted solution
The first thing I would try is to try connecting it to another computer and see what happens. If no other computer is available, try plugging it into another USB port on your computer.
In [b]Disk Management[/b] does the drive show "Online" as well as the size and what format the partition is in? Also if you right click on it, what items (selections) aside from [b]Format...[/b] is available to you?
I can understand your frustration of possibly having to make a return trip to Best Buy, but that might just save you a bunch of grief later. In other words it could be that there is something wrong with your drive and replacing it now under warranty might save you heartache later? :) At the very least they could plug it into their computer to verify if it's the drive or something with your computer...
by paracosmos Accepted solution
by rob kuhn Accepted solution
I don't think the failure you are describing was caused directly by the updates but I also wouldn't rule it out. The only way I can see it causing a problem is if it updated or changed the driver of your USB controller or the update was a firmware update to the external drive itself - generally that requires a seperate/special setup program that will warn and caution you before being applied.
That being said the problem is most likely the external drive, the USB cable or the USB port on your computer. The easiest and quickest way to verify this is to plug it into another computer and see if the problem follows the drive.
Another thing you can try is to try a restore point prior to the updates being applied. This would help rule out an update causing the problem. To be perfectly honest I'd attempt this as a last resort. One that I would attempt after verifying that the external drive was good.
If there is no data on the drive, or data that you are not too concerned about and OK with losing, I'd take it back to Best Buy and have it tested/checked out. It should take them less than a minute. If it checks out and works there then you can focus your attention to your computer. If it fails there then you walk out with a new (replaced) external drive. :)
by mjd420nova Accepted solution
by paracosmos Accepted solution
by oh smeg Accepted solution
And it's makes no difference if you plug it into another USB Socket so the only other option you have is to try another USB Lead.
if that doesn't make any difference the Actual Enclosure or the HDD in it has failed and needs to be replaced.
[i]Edited to add[/i] Have you tried running the [b]chkdsk /r[/b] on this drive to see if that makes any difference?
Col
by rob kuhn Accepted solution
[b]chkdsk /r[/b] without a drive letter would only perform it on the boot drive. :)
At this point I'm thinking it's a hardware failure in the enclosure or the drive itself. Easiest thing is to plug it into another computer. If problem follows then it's the drive. If it works on another computer then he needs to focus his attention to his computer. Seems like taking it back to BestBuy would accomplish this. :)
by rob kuhn Accepted solution
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending