Question Locked

My Maxtor one touch II cant be found!!!!!!! help me please!!!!!!

0 helpful
16 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a maxtor one touch II external hard drive.. I let a freind get some pictures off of it and now it doesnt work. My coputer says the hardware was installed succesfully bt i cant see the drive in my computer. I need to get pictures and movies i stored on it really bad. Is there any way i can recover my things off of it?????

16 replies

by older mycroft

Power down, power up again, plug the Maxtor back into the usb port. Windows will reinstall the drivers and you should see your drive inside My Computer.

by sgt_shultz

Have you had a look in Disk Management to confirm the drive does not appear there (sounds like so far you've only looked in My Computer for it)
If you don't see it there either, something has gone wrong hardware-wise. You can purchase another enclosure and move the drive (just a normal hard drive in there) to the new enclosure. See if you can find another hi speed usb device to put on the port the drive is using to double-check that the port and cable are good.
Did this drive have the locking software in use and did your friend perhaps lock the drive? have you 'looked' for the drive on your system using that software?

by gqscuba

I did the disk management thing, and didnt see it. all i saw was a host controller or something. im kinda new to this stuff so i dont know how to look for it with software. the ports and cables are good i used them with other things. I just need to know how to get my stuff off of the drive. what would you do????

by absolutely

"what would you do????"

There's no need for so much punctuation, or worry. You will get your data. Tell us, precisely, what you did see when you "did the disk management thing", and don't bother telling us what you did not see.

"I did the disk management thing, and didnt see it."

We enjoy solving problems, but non-symptoms are no more helpful to us than to your doctor. You don't tell your doctor, when you are trying to solve indigestion, that your elbow does not hurt. By the same token, telling us what is not happening will only delay our diagnosis of your computer's ailments.

B-)

by absolutely

the previous post mentions some proprietary maxtor software, which you say you don't know how to use. it looks like you need to read the manual, or at least skim it for the 'locking' feature sgt_schultz mentioned. I don't know about that particular software but if the manufacturer has made their device to work only with their software...

by gqscuba

First of all. Sorry if i was being rude. I didnt mean to come across that way. I just dont know much about this stuff so i was kinda woried i would never see my data again. I apologize

Ok I looked in disk management and see 3 things 1st my c drive then 2 other drives ones a fat32 at 4.63 gb. i am guessing its my recovery information. then theres one more thats a FAT its only 47 mb . i dont know what it is. they both dont have a drive letter either

Ok one other thing i went into device manager and under disk drives it doesnt show my hardrive, but i do see a ohci compliant IEEE 1394 host controller my drive is 300 gb so it should be easy to spot

I hope all that helped and im looking forward to your reply. thanks for all the support

by absolutely

I thought you were panicked, not rude. I'm not worried about your manners, especially if you give thumbs up for useful answers.

IEEE 1394 is 'firewire', so if your external drive is connected by a cable that is roughly U-shaped, or D-shaped (like a squished capital D) then it is on the IEEE 1394 interface. If the connector is rectangular, with no rounded edge, it's a USB cable. Either way, finding the interface that you're using in device manager shows that your system at least is functioning on that interface, which is probably good, or at least better than having a problem with your main system's USB or Firewire controller.

I'm getting the impression Old Mycroft is right and you need to uninstall the drivers using Add/Remove Programs. Don't ask any of us why it works. It's just one of Windows' quirky charms that uninstalling & re-installing drivers solves a lot of problems. This really just means that installed drivers don't stay correctly installed, and none of us really likes to talk about that much.

:D

by gqscuba

I have uninstalled everything and reinstalled it. It still wont work. Is there anything else I can do??? Thanks

by absolutely

Before you do this, have you checked for any windows updates for this device? It may be a known issue, with a fix in a windows update. If not, check www.maxtor.com for the newest version of the software for this device. If there are any updates, follow their directions.

by userdeletedbyrequest

This Is For XP, with your hard drive plugged in.

1. Right Click My Computer
2. Click Manage, computer management should open
3. on the left hand side click disk management
4. You should be able to see your external hard drive, right click it and press "change drive letters and paths"
5. Then a new window should open click change.

Continue to change the drive letter, change it to a letter that isn?t being used EG drive z.

by davepherrin

thanks for the timely helpful help. I wasnt sweating it, but was bothered by it. My drive got the plug pulled out and then i could not see it in my computer any more. I changed it to Z drive....good to go. thanks for the help

by ianca123

I've gone to the disk mgmt and found my Maxtor 4 Mini drive, but when I right click it, it doesn't give me the option to allocate a different drive. THe only options it give me is to view its properties.

I'm at wits end, can anyone help?

by michaeloconnell3

This drive only works with the maxtor software here

Put this FTP in your browser its maxtors ftp server this is the software
it will download and ISO file
you will need to put this on a disk or get software such as magiciso to create this mount virtually etc
if you have any questions please ask
here is the link

ftp://ftp.seagate.com/outgoing/stxsupp/maxtor/Personal_Storage/OneTouch_III/OneTouch_III_USB_Combo_&_Triple/OneTouch_III_Orig/OneTouch_III_Orig.iso

by add2964

I have the same problem and i am using Windows XP. When I right click on the drive "change drive letter s and paths" are not listed as options? What do I do now?

by peconet tietokoneet

I had this happen to me many atimes so i took out the drive and put it in my case so i could get my data off of it. All you need is a screw driver to get it open to get hold of the drive, you might need either a SATA cabe or a IDE cable depending on the make and model, if it was a recent purchase then it would be a SATA drive that is inside. I do not have any external drives any more because of the problems that the external drives have.
If you need any drives just get internal SATA drives instead with SATA cables of course.

This discussion is closed to new replies.