Discussion Locked

My modem dials the wrong number

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I dont know if anybody will be able to help but i think i'm going mad.

I am trying to get a modem to dial my ISP from a landline in my office. The problem is that when the number dials I get a message from the telecoms supplier that the number has not been recognised.

I know that the number is correct. I have also tried dialing the number from a handset using the same line and it reaches the right number (i hear the screeches).I have tried the modem from other locations and it dials correctly.

The modem dials other numbers correctly.

I am using windows 95.I have reinstalled Communications and the modem drivers. I have tried 3 different modems and 2 different PC's.

It doesn't appear to be the modem the line or the PC. But hang on, what else is there.

Please any sudgestions would be fantastic.

Cheers

11 replies

by claymuir

It sounds like to me the line is setup as a digital data line. It the line you are trying to use in a business setting? Typically when you are dealing with a company type envirnment a PBX box will exsist somewhere in the buidling. The box spilts lines out and assigns them "numbers/extensions" or mailboxes. The problem comes before that because before the main line (T1) enters the box it is split by a Adtran router or the like. This router splits the signal between Voice and data. If the line you are connecting to is setup wrong a modem will not work on it. If a normal phone like you would use a home will owkr this is not the case. A headset or company phone would work however.

by ebob

I have found that if you're trying to use an analogue modem on a digital line, you won't get a response (but you do stand a risk of damaging the modem/computer/phone system).

It sounds to me like you've got a checkbox either checked, or not. Likely the "Dial '9' to get an outside line" option. If you need this, and you have this checked, you do not need "9," in the dial string, too.

Turn up the speaker on your modem and listen to the dialing, and try to debug it from that.

You may alsoneed to put an extra pause or two in the dial string before the number ("," typically).

by paulp

I agree with the first two answers.
One test you could do would be to try plugging the modem into a fax phone line. The fax would be on a POTS line which would be perfect for your modem.

by greggen

One thing to try is to use HyperTerminal and type in the number yourself.
HyperTerminal is under accessories/communications.
When it comes up type ATDTxxxxxxx (x being the number) Make sure to add a 9 if you need to dial that to reach an outside line.
Hope this helps

by sedghi

you write that the modem dials other numbers correctly. I have a question If you check this at the same place or not?

This discussion is closed to new replies.