Discussion Locked

My PC can not boot in any mode in XP SP2

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
During boot attempt, after splash Windows screen, Windows XP SP2 stops without Logon screen - it does not show nor Welcome screen, neither screen with user account selection. Why ?

13 replies

by debian

Hi,

Please try to boot your machine in safe mode use the following procedure

Restart your computer.
When the machine first starts again it will generally list some equipment that is installed in your machine, amount of memory, hard drives installed etc. At this point you should gently tap the F8 key repeatedly until you are presented with a Windows XP Advanced Options menu.
Select the option for Safe Mode using the arrow keys.
Then press enter on your keyboard to boot into Safe Mode.
Do whatever tasks you require and when you are done reboot to boot back into normal mode.

After booting in safe mode please try to use system restore option to restore your machine.

1. Log on to Windows as Administrator.
2. Click Start, point to All Programs, point to Accessories, point to System Tools, and then click System Restore. System Restore starts.
3. On the Welcome to System Restore page, click Restore my computer to an earlier time (if it is not already selected), and then click Next.
4. On the Select a Restore Point page, click the most recent system checkpoint in the On this list, click a restore point list, and then click Next. A System Restore message may appear that lists configuration changes that System Restore will make. Click OK.
5. On the Confirm Restore Point Selection page, click Next. System Restore restores the previous Windows XP configuration, and then restarts the computer.
6. Log on to the computer as Administrator. The System Restore Restoration Complete page appears.
7. Click OK.

by zaphodtwin

Nay, it doesn't work... It's the first thing that I tried to do is to start in Safe mode... :( I repeat: any mode doesn't work - just I see splash screen (Windows logo with running bar below) in Normal mode and... NOTHING !!! In Normal mode I see mouse pointer - and I can move it as usually but screen is black without any GUI... nor Welcome screen, neither User selection...
Moreover, in Safe mode it's just stucked... when I press Power-off PC off immediately like in DOS-mode on 10-years old PC... in Normal mode I have to wait standard time of 4 seconds before release Power button... So here is such an enigma...
Now I've installed on separate disk second copy of WinXP, but I'm afraid the problem cannot be solved by dumb comparing... I feel that I'm walking somewhere around right solution, but where it ? I do not detect...

by blowtoad

I had a similar problem on one machine after some patches were installed. It turned out that the SP2 install did not work propperly and then later a patch for XP sp2 caused this problem since SP2 wasn't installed right.

I had to use a XP CD to go in to the recovery console do a bunch of copy, rebot, copy, reboot...

It is all detailed in this KB article:
http://support.microsoft.com/?kbid=307545

After all that, I had to remove service pack 2 and reboot, and reinstall sp2.

here is a post that talks about bad SP2 installs.
The problem discussed in this case is different from your problem, but it may still be helpful.

Hope that helps.

by joseph moore

Did you try and boot off the XP cd and select the Recovery Console option, to boot into Recovery Console?
From RC, you could check out BOOT.INI and see if it is OK or not. Maybe it's been changed and has a bad value in it (like the /NOGUIBOOT option???)??????
Take a look at this Technet article on how to use RC:
http://support.microsoft.com/?kbid=314058

by dkzgambo

IFf all said and done and still not successful, try a re-install/repair of XP then re-install sp2.

NOTE: I dont like SP2 myself because of system instabilities. stay with sp1 if you can

by normh3

I have seen this problem several times in the shop and have never had any success in recovering. Unfortunately, a full reinstall may be required.

-Norm

by normh3

EDIT: When it boots to the blank desktop, are you able to bring up Task Manager?? If so, check to see if 'explorer.exe' is running. If not click 'NEW TASK' type 'explorer.exe' and then 'OK'. I am curious if that helps solve your issue.

by zaphodtwin

Nay, no GUI, except controllable usual mouse pointer - black screen & arrow of pointer, that can be moved by mouse...

This discussion is closed to new replies.