Question Locked

My pc is not start, when i start a error is diisplay:- (the ordinal 173 cou

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
My pc is not start, when i start a error is diisplay:-(the ordinal 173 could not be located in the dynamic link libry eirtutil.dil.)

2 replies

by oh smeg

So to start off I would test the HDD with it's Makers testing utility, naturally this relies on you knowing who made the HDD

http://www.tacktech.com/display.cfm?ttid=287

If you don't know who made the HDD and don't want to open the case and look at the sticker on the HDD, try Seatools from Seagate or download the Ultimate Boot CD from here

http://www.ultimatebootcd.com/download.html

And use each HDD Testing utility till you get one that runs. Both links are free so there is no costs involved. ;)

If the HDD passes the Test you can then start going about repairing the Installed OS but if it fails the test you need to remove it from that computer connect to another computer and retest. If it fails the second test the drive has gone to [b]Silicon Heaven[/b] but if it passes the second test the M'Board, Data Lead or Power Supply in the first computer has failed and need attention.

Col

This discussion is closed to new replies.