Discussion Locked

my puter crashed..HELP

0 helpful
18 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

OOOPPPSSS I accidentally posted this in the wrong place earlier...sorry. first time...
The other day...my computer crashed..affecting mainly my Ddrive. Which is basically used for storing all my work, so that I don't clog up my C drive.
I scan disc'd the D drive which was supposed to fix the errors as it went...but upon completion, I still can't access any of the files in my D drive. My files are predominantly Graphics. Three months of work is locked up and I can't access it...I'm almost inPANIC mode because it's my new business venture...and when the orders come in ...I'm up the creek.
HELP???????

18 replies

by dpalsen

I'm shooting from the hip here, since your post is quite vague, but there are services out there to help you get your information back. However, before you go out and spend $10,000, try giving us some more information here. Is it two partitions onthe same physical drive, or two hard drives? I'm assuming Windows OS, but NT or 9x? We can't help much without any information.

by philthegreat

Well, you are using the programs in C; but store the Graphics in D?
I think there are some possible reasons:
1) NOT enough RAM; because Graphics e.g. CorelDraw are RAM-eaters. If you are rendering a 3D image; it takes double to triple the size of the file.
(close all the unnecessary programs; run--> "msconfig"-->startup-->unclick all the unnecessary programs, it does not load the programs only, will not uninstall them)
Buy RAM!

2) The programs used have bugs or the files have a wrong index? Do a scandisk on Both of the disks and then make a "defrag"ment. run-->defrag. Fragmentation will eat up RAM and causes lots of errors.

3) Very noisy when you are using the computer? Too hot and it helds the system. Solution? Cool them. Open the tower case and put the tower in a open place and try to blow it with a fan. Then work with your computer with this open-tower-case computer. If it works; then you have found the problem.
Add power fan or a larger and better tower case.

by shanghai sam

Hi Phil: after reviewing all the comments made several times, I have come to the conclusion that there must have been a virus or bug that infiltrated my pc. So that part of your comment was correct I think. But At that time, I couldn't defrag at that time because of the issues outlined below.Thanx for your comments.

by _ladyhawk_2

ok..the two drives are separate. I know this because one was added to the computer after in an upgrade. I've tried to scan disc..but almost all the way through it stops and tells me that there is a 'top level' file that needs to be renamed...I can't even find this file..believe me I've looked. There is also a file...i just found out..that contains 'fragmented files' that cannot be messed with or it will ruin the system?...so I don't even know how to integrate these files back into the mainstream of the program.
don't forget...I'm not very knowledgeable...but I'd like to fix this if I can without losing my graphix files...thanx

by vh_s

Please inform us your OS you used when your computer crashed and what you used now. It would not be bad if you also give us more information regarding THE Crash.

vh_s

by _ladyhawk_2

ok...OS Windows ME...The Crash?..well...while working in my Word file...daughter had the music going...while offline..some old music downloaded long ago...and this is something that she does regularly...unfortunately we share the pc. Suddenly thewhole thing froze up. couldn't use the mouse etc. so she was forced to shut it down.(needless to say this happened while I was out.)(sigh)
I come home and she's tried to start it up more than once...from what I gather.
meanwhile.like I've said before, I've scanned D drive and hit a wall because there is some mythical 'toplevel' file that is messed up...
hope this helps.

by _ladyhawk_2

Well...here's what happend next.
I checked out your 'threads' and sure enough the dialogue matched up with what my pc was telling me...however...when I finally located the file that was causing the problem..I discovered that it contained all of myfiles that I wanted to save and not get rid of...So...I started sorting out what I needed and what didn't belong...and I don't know how it happened..but the whole thing just disappeard...I mean..VANISHED.
The wierd thing is my hard drive still shows that the same amount of space is in use, but there are no files...NADA.
I then scanned disc...and it put all the file fragments...5000 of them...into individual folders.
I am taking this very calmly...but still am no further ahead...because I still don't know whether your idea fixed it or not....

by twistypigeon

This sounds very horrible!
It sounds to me like WindowsME has messed up the FAT table on the drive. The FAT table is the File Allocation Table. This is basically a list of all of the files on the drive and where they are physically. With every fix it seems to be getting worse!
ME has a vague idea about the data on the drive, but the FAT table has lost track of what bits of data go with which files. This is a reasonably no hope situation without professional expensive help. As most of these important files are graphics files they are also going to be more difficult to reconstruct! If they were text files you may have been able to look inside the file fragments and see which ones came from where!
Anyway... It is a VERY long shot but try renaming some of the file fragments to known file extensions for graphics files such as .BMP, .JPG, .TIF, or whatever you were using. If you catch a contiguous, complete file, you may be able to load it up. But the chances of this as occurring as you can imagine are remote! The files retrieved are more like streams of data, bits of different files intermingled together. The majority of them will not load to create a valid graphical file.
I can't suggest anything else apart from trial and error, or expensive recovery software!

Sorry!
Hope something turns up!

by _ladyhawk_2

Hi TSyk:
Thanx for taking the time to read my tale of woe. I have just about given up..because like you said...expensive is the underlying word.
I don't know whether I'll be able to somehow get someone to dig into my pc's memory banks and pullout what got lost or misplaced in there, but it will have to wait util I have some cash.
sigh.
on the bright side. I can always re do the whole project (three months worth) and perhaps do an even better job than the first effort. That is my only consolation..and while I'm at it..go out and buy Iomegazip-100mg/cartridge of hardrive that's outside of my pc.
or even better, a Jazz - 1000mg/cartridge which would store my work totally independantly of my pc.
if the pc crashes my work is safe.
maybe this is just one of those really sad things that I have to go through to learn a lesson.
thanx for your concern.
Liz

by pggoodwin

you said you saw the files at one time..I would get a zip drive..hook it up and if you can ever see the files again save it to a zip disk..you should have a good backup system anyway if the info is that important.If you have a lot of data get a tapebackup system

by _ladyhawk_2

Thanx for the suggestion!..I realize too late that I should have done this months ago...just never thought it would happen to me. I thought my D: drive was save..you know..not on the same drive as my OS...just mainly a storage spot...Guess I knowless about puters than I thought..OBVIOUSLY..lmfo.
thanx for your comments...It's definitely going to be my next major purchase..

by vh_s

_ladyhawk,

Sorry, I am currently having problem accessing my mailbox in Yahoo. I don't know why.

From what I've read about the problem, yes I agree that the FAT probably have been messed up. This could happen when the Scandisk program is trying to fix error, and as you said.. taking forever, you initiate reset on the computer using the reset button.

Usually this would involve only the targeted file (or in case of a directory, would also involve files under it). Yet, to my understanding, on a highly fragmented drive this kind of action would cause a disaster, since technically one disk cluster is being used by two or more files.

Therefore, reading from your description, I would conclude that you have lost your files. If you havea lot of FILExxxx.CHK, then these are fragments of your original files.

vh_s

by _ladyhawk_2

hi vh:
I am inclined to agree with you. I have basically resigned myself to the fact that I have lost all my stuff.sigh. I want to say that I appreciate all the helpful hints and suggestions that I have received from everyone at TechRepublic.Being a 'novice' is a horrid thing, and I am determined to learn as much as I can so this won't happen to me again.
If there are any books that you can recommend - short of university courses-
I would be much abliged.
It is a humbling experience to have this happen, but you have all done your best to encourage me instead of putting me down.
Thanx again..and I hope to hear from you sometime.
Liz

by quaint_data

Hi I feel for you too, having lost my 2nd hdd as well and saved all my good stuff there for safety, suggestion very simple, try.. go to start.
run
type in sfc (scan for corrupt files)
it will prompt you with updated stuff and restore corrupted files, sometimes this can remove the stoppers and open otherwise locked files. Cheers Merete

by shanghai sam

Hi merete: thanx for your comments. I ended up doing a system restore after totalling my D drive anyway. None of my files could be saved. I ended up deleting all the empty file folders which had duplicated themselves within themselves..it was a huge mess. I ended up restoring just to get the drivers back.

This discussion is closed to new replies.