1 reply
by jercro
Did you originally have an OS on the slave drive? Windows will keep a pagefile on a drive that was originally the boot drive. Go into System REcovery Console and update the MBR. You may need to boot from the cd to get into system Recovery Console and you will need your system administrator password. Then delete the pagefile from the slave drive. NOte that System REcovery Console will assign DOS drive letters to drives that do not have WinXP assigned drive letters. Type help at the System Recovery Console prompt if you are not fimilar with the commands.
Or...
You might try this. Be sure to do a restore point before you change registry. You will have to look for a drive that doesn't have a drive letter designation and give it a drive letter that is not already in use. Only other suggestion would be to disconnect the slave drive and do a reinstall of WinXP.
HOW TO: Change the System/Boot Drive Letter in Windows
Changing the System/Boot Drive Letter
1. Make a full system backup of the computer and system state.
2. Log on as an Administrator.
3. Start Regedt32.exe.
4. Go to the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices
5. Click MountedDevices.
6. On the Security menu, click Permissions.
7. Check to make sure Administrators have full control. Change this back when you are finished with these steps.
8. Quit Regedt32.exe, and then start Regedit.exe.
9. Go to the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices
10. Find the drive letter you want to change to (new). Look for "\DosDevices\C:".
11. Right-click \DosDevices\C:, and then click Rename.
NOTE: You must use Regedit instead of Regedt32 to rename this registry key.
12. Rename it to an unused drive letter "\DosDevices\Z:". (This will free up drive letter C: to be used later.)
13. Find the drive letter you want changed. Look for "\DosDevices\D:".
14. Right-click \DosDevices\D:, and then click Rename.
15. Rename it to the appropriate (new) drive letter "\DosDevices\C:".
16. Click the value for \DosDevices\Z:, click Rename, and then name it back to "\DosDevices\D:".
17. Quit Regedit, and then start Regedt32.
18. Change the permissions back to the previous setting for
19. Administrators (this should probably be Read Only).
Restart the computer.
You could also try a copy of Nortons Partition Magic to reconfigure the drive settings and remove the MBR of the slave drive.
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending