Discussion Locked

NAT on Win2K

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We've got a Win2K server performing NAT. When a NAT client tries to download a file from a server on the other side the download sometimes fails after a couple of minutes with the following error: Cannot copy XXXX: The specified network name is no longer available.
I've tried increasing/decreasing the TCP/UDP timeouts for NAT but the same problem still occurs. I've got 2 Intel NIC's teamed on the public side and 1 Intel NIC on the internal side. There's 3 IP's bound on the external interface and 1 for internal.
Would really appreciate any help.
Email me for more info

5 replies

by espen

Personally I don't like relying on a Win
server for routing / NAT. You will be far
better off configuring your router to
perform the NAT. Cisco's routers does
this very well, and I am sure other brands
will do an equally good job.

by estebandelatorre

Why don't you use a 500$ router to perform NAT?
I think that the problem may be with the 2 nic cards to the public interface. Why do you have 2 and not only one?.
Try to remove one of this nic card and bound the 3 ip addresses to the same card andsee what happens?

This discussion is closed to new replies.