Discussion Locked

Need a help!

0 helpful
0 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Dear Sirs!

We've just bought 3com USR MP16. while configuring we've used the same jumpers-settings as were on single Courier modems:
1.normal DTR operation-------------off
2.verbal result codes-----------------off
3.result codes displayed------------on
4.local echo ebaled------------------off
5.modem answers on first ring---off
6.normal CD operatoin---------------off
7.result codes for origin/answer--off
8.AT comands enabled-------------on
9.hang up on escape code--------off
10.load configuration from NVRAM-off

but, the modem pool doesn't take phone.....
on the other hand, the router is configured to suite single courier modems' .,
The question is as follows.:

maybe we're setting jumpers not quite properly or maybe there is something with router configurations, something that should be changed....or both....we've got cisco 2611 router.

with respect,

e-mail:
i_a@geo.net.ge

0 replies

No replies were posted before this discussion closed.

This discussion is closed to new replies.