Discussion Locked

NetMeeting Port

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I'm running Exchange 2000, ISA server, on a multihomed PC. How can I configure a filter port to allow an outside connection to NetMeeting from the internet. I can connect fine from the behind my firewall but not from the internet.

2 replies

by ntoz

You can configure firewall components in a variety of ways, depending on your organization?s specific security policies and overall operations. While most firewalls are capable of allowing primary (initial) and secondary (subsequent) Transmission Control Protocol (TCP) and User Datagram Protocol (UDP) connections, they might be configured to support only specific connections based on security considerations. For example, some firewalls allow only primary TCP connections, which are considered the most secure and reliable.
To enable NetMeeting 3 multipoint data conferencing ? program sharing, Whiteboard, Chat, file transfer, and directory access? your firewall only needs to pass through primary TCP connections on assigned ports.
NetMeeting audio and video features require secondary TCP and UDP connections on dynamically assigned ports. Therefore, if you establish connections through firewalls that accept only primary TCP connections, you will not be able to use the audio or video features of NetMeeting.
Establishing a NetMeeting Connection with a Firewall

by ntoz

When you use NetMeeting to call other users over the Internet, several IP ports are required to establish the outbound connection. The following table shows the ports, their functions, and the resulting connection.

Port Function Outbound Connection

389 Internet Locator Service (ILS) TCP
522 User Location Service TCP
1503 T.120 TCP
1720 H.323 call setup TCP
1731 Audio call control TCP
Dynamic H.323 call control TCP
Dynamic H.323 streaming Real-Time Transfer Protocol (RTP) over UDP
If you use a firewall to connect to the Internet, it must be configured so that the IP ports are not blocked.
To establish outbound NetMeeting connections through a firewall, the firewall must be configured to do the following:
?Pass through primary TCP connections on ports 389, 522, 1503, 1720, and 1731.
?Pass through secondary TCP and UDP connections on dynamically assigned ports (1024-65535).
The H.323 call setup protocol dynamically negotiates a TCP port for use by the H.323 call control protocol. Also, both the audio call control protocol and the H.323 call setup protocol dynamically negotiate UDP ports for use by the H.323 streaming protocol, called the Real-Time Transfer Protocol (RTP). In NetMeeting, two UDP ports are determined on each side of the firewall for audio and video streaming, for a total of four ports for inbound and outbound audio and video. These dynamically negotiated ports are selected arbitrarily from all ports that can be assigned dynamically.
NetMeeting directory services requires port 389. Microsoft Internet Locator Service (ILS) servers, which support the Lightweight Directory Access Protocol (LDAP) for NetMeeting, also require port 389.

This discussion is closed to new replies.