Windows Forum

Ask something
Discussion Locked

Network Bootdisk

0 helpful
6 replies

by darksheer

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am attempting to make a network bootdisk for a Lab of computers all using a D-LINK530 network cards, so that they can connect to a NT share when I boot with the disk, and do maintence. As of now I have finally been able to get the driver to initialize and bound, along with all the protocols loaded. But when the autoexec.bat loads NET START WORKSTATION it comes up with a Error 36: The system has detected an overflow in the sharing buffer.

Well, from what I can gather, this means to many files are being loaded within the buffer, but I don't know how to correct the problem. I tried adjusting the FILES but it didn't work.

This is a bootdisk I am making, or rather tweaking for myself, and I am not using the NT disk it makes, rather it is one from www.bootdisk.com

Any help would be appreciated, and please let me know if you need more information.

6 replies

by darksheer

NET HELPMSG 36

Tells me that I am sharing to many files, but I have not even logged onto the domain or the share, so I don't understand why its giving me this error.

Help!

by uru_98

On the bootdisk's that I have the command is just NET START ... without the WORKSTATION.

Also, what protocol are you using? Is the server on the same Subnet? If you are using TCP/IP, is it static or DHCP?

If this is still a problem, I can email you a TCP/IP boot disk that I made. You can set it up to boot three different kinds of NIC's. I can also send you the simple one that boots just one NIC.

This discussion is closed to new replies.