Discussion Locked

Network Connection

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have one Server NT 4.0 and one workstation which is Win98 connected using a 5 port hub. I'm using netbui and I can't talk to each other. Do I need a crossover cable or is something not configured properly.

5 replies

by mikeanselmi

A crossover cable is used to connect two hubs or two computers directly. Netbeui requires two things:

1) A unique netbios computer name for each machine

2) A workgroup name (must be the same for both computers)

Once you have these things setup your computers can speak with each other...they may not appear under network neighborhood if you don't have "client for microsoft networks" and "file and printer sharing" installed on both PCs.

by mckaytech

Since you have a hub, you don't need a crossover cable but you do need to make sure that you're plugged into two regular ports on the hub. Many hubs have a crossover port that is designed for hooking hubs together and if you plug a workstation intoone of them, things won't work. Usually a crossover port is marked by an X or something similar (or it may be called an uplink port).

On the hardware level, the other thing to check is that you have link lights at both NICs and at the hub.

Ifso, and they still can't talk, you need to make sure that both NICs are configured and that both machines are in the same workgroup with different computer names. Also, make sure you have enabled file and printer sharing on both so there will be something to see in Network Neighborhood.

paul

This discussion is closed to new replies.