Discussion Locked

Network Design

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have seven offices in a building with on
average 50 users each. They all have separate
LAN's but now needs to be joined in WAN via
fiber. High Speed access is required in the WAN.
What hardware and software equipment is recommended to link theLAN's and provide
security for the individual offices?

4 replies

by ebob

If they're all in the same building then they just need their LANs connected, but it's still a LAN.

I would run a fibre backbone from each office area back to one central site that will be the common communications centre.

These fibre runs canall be connected to either a high-speed switch, or a router.

The switch is likely to be the better choice. It will be less expensive than a proper router, and more flexible (with VLANs and management possibilities). Make sure that you get a few extra ports. Eventually, you will be bringing in an Internet access, and it can be connected here, as can common services like email, Intranet, DHCP, DNS, domain controllers, etc.

The advantage of a router (over a switch) is it makes very clear boudaries among the connected LANs, and will require almost no reconfiguration on the client PCs.

This discussion is closed to new replies.