Discussion Locked

Network & Dial-up Conn. on Thinkpad A20m

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I'm running Win2K V5 Professional on a Thinkpad A20m. I've setup 2 Dial-up Connection profiles. Both profiles work - that is they allow me to make the connection. The problem is that there is no indication that there is an active connection. No icon is placed on the task bar, and if you look at the icon in the network and dial-up connection folder - it is displayed as "disconnected". The only way I can disconnect from the remote connection is to restart or unplug the connection. Can't find anything in properties that might address this.

8 replies

by lord ago 1

I would suggest a using modem indicator. They usually have the features you're looking for. I had one for a while to see what it could do even though I wasn't having the same problem you're having. It'll sit on your taskbar and give you the info youneed. You can find some good ones at:www.nonags.com . Pretty much everything you find there is freeware and they have a HUGE collection of different programs that could help you out. HUGE meaning unless you're on a fast connection, you'll have a while before the pages load.

Have Fun!!

by simon sedgwick

In the connection properties for these connections there is a check box, its says something like, show in taskbar when connected. Is this checked? I am running multiple dial up connections from my Win2k box and have not seen these symptoms before.
Are they both Modem Dial-up or PPPoE or both?

Post a comment .. =)

by techwimp

Both connections are setup as Dial-up using PPP. The "show icon in taskbar" is checked.

This discussion is closed to new replies.