Discussion Locked

Network drives keep disconnecting

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I'm running Win2K professional on all of our workstations. On my station (administrator) my network drives are constantly losing their connection.
How can I fix this.

5 replies

by stillatit

You do not say how many workstations. Remember that W2K workstation, like all of the Microsoft non-server products, only allows 10 simultaneous connections.

Note that any station sharing drives should NOT have any power-saving methods enabled which might shut down a drive, and should NOT be running any screensaver which generates 3D images. (The latter have a tendency to swamp the CPU, which could cause it to miss a status inquiry.)

Good luck.

by michai

Windows 2000 can disconnect idle sessions after a set number of minutes.
The number of minutes can be set at a command prompt using the Net
Config Server command on the workstation side. For example, to set the
Autodisconnect value to 30 minutes:

Net Config Server /autodisconnect:30

The valid value range is -1 to 65535 minutes at the command line.

To disable Autodisconnect set it to: -1.

Net Config Server /autodisconnect:-1

This discussion is closed to new replies.