Discussion Locked

Network mapping

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We have a WIN2k workstation and our goal is to be able to map a drive letter to an AS400 server. We can ping the IP from the command prompt. But it does not show up in Network Places or show up using Find Computer when we enter the IP address of theAS400. We have a WIN98 PC with the same exact setup and it pings as well as maps to the IP address of the AS400 successfully.
What do we need to do different with Win2k?

9 replies

by erikdr

Apparently the AS400 emulates a NT server, and advertises through WINS/NETBIOS so that the 'browser' of the workstation can find it.
Alas, W2K uses a different model based on Dynamic DNS. So two roads:
* Configure W2K professional to use the browser and WINS methods. Dunno how this can be done, if at all.
* Upgrade the AS/400 software to support DDNS. Definitely IBM plans to support this, dunno if the upgrade is out already.

Have fun,

- The Netherlands

by shanghai sam

The answer lies in "NetServer". The easiest way to configure it is through the Operations Navigator that comes with Client Access. When you open OpNav expand My AS/400 Connections, then the system you want to share files on, then Network, then Servers, then TCPIP, then right click AS/400 NetServer in the right hand side of the window and choose start if it is not already started. You can also go to properties when you right click on it and change the wins server and domain name if you want.
Now go to File Systems, then right click File Shares and choose Open AS/400 NetServer. You should be able to add shares there and then map from either client.

That should get you most of the way there.

by bradsolcom

The answer lies in "NetServer". The easiest way to configure it is through the Operations Navigator that comes with Client Access. When you open OpNav expand My AS/400 Connections, then the system you want to share files on, then Network, then Servers, then TCPIP, then right click AS/400 NetServer in the right hand side of the window and choose start if it is not already started. You can also go to properties when you right click on it and change the wins server and domain name if you want.
Now go to File Systems, then right click File Shares and choose Open AS/400 NetServer. You should be able to add shares there and then map from either client.

That should get you most of the way there.

by bradsolcom

I don't know why it says transient above this answer, I had problems submitting this answer originally, but the answer is mine so I would like the points if it is accepted.

Thanks BradSolCom

by estebandelatorre

You have to install Shared Foldes in the As/400. That separates some disk for saving files in the AS/400 Hd sub system.(not shared with as400 data libraries) But in order to move files from as/400 to PC using win2k explorer, you will need more thanthis

This discussion is closed to new replies.