Discussion Locked

network nt 4.0 workstation and win98 se

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a home network with 2 win98 machines and my work laptop with nt 4.0 workstation. The nt domain name and win98 workgroup name is the same. I have user accounts for the win98 machines set up on the laptop. The laptop can access anything on the win98 machines. the win98 machines can see the laptop in network neighborhood but can't access anything even though I set up file sharing. When I try to access from win98 I get an error message, " the logon server cannot be accessed".

What do I need to do to correct this situation?

Thank you for your help.

Rich

9 replies

by ckwhittle

Under network properties in the control panel, make sure that you have Client for Microsoft Networks installed. Click properties and check the box "Log on to Windows NT Domain", and type the name of the domain below. This will only work if the NT server is set up as a Primary Domain Controller.

by piklrich

See answers 3 and 4 but thank you very much for trying. I wish the rating choices were kinder.

by mphoffar

When you create a share on the NT machine, you're assigning the group "everyone" to the share, which is from your NT domain at work.

From what you've said, I beleive all you'll need to do is go back to the permissions of the share and choose the machine name instead of the domain and apply everyone there instead of everyone on the domain.

Mark

by piklrich

See answers 3 and 4 but thank you very much for trying. I wish the rating choices were kinder.

by gregory pleau

NT Workstation does not have the capability to be a domain controller. The environment you describe is a workgroup.

On the NT machine, change the network setting from Domain (which requires the use of Windows NT Server) to Workgroup. On the NT Workstation computer, create user accounts that *match* the Win98 users - both the username and the password must match or you will get an IPC$ prompt instead of access to the shared files on the NT Workstation.

Good Luck

by piklrich

This is the first person to correctly analyze my problem. I didn't realize workstation couldn't be a domain server. Thanks for taking the time to answer.

by buffalodan

An Addendum to the above answer,

Yes, your laptop is configured to be a member of your work network domain....
and this prevents it from participating in your home network.

A strong word of warning before making changes to your work laptop!!!

This machine belongs to your employer and you should not attempt changes on it without their knowledge or permission.

You must also have administrative privilidges on the laptop before you will be allowed to make alterations to the network configuration

if not done properly, you could render the laptop unusable on your corporate network, requiring an unnecessary service call, and possible disciplinary action.

the best recourse would be to enquire from your networking people at work as to the feasability of setting up multiple profiles on the laptop, one profile allowing for joining the corporate domain, the second profile, allowing your laptop be part of your home workgroup

Good luck....

by piklrich

Excellent suggestions and I will follow up on them. I can get in as an administrator myself but I'll ask our network team as work to set up a home profile. Thank you for your help.

This discussion is closed to new replies.