4 replies
by candofaucher Accepted solution
by scott_heath Accepted solution
by candofaucher Accepted solution
I was just checking into the cable situation when I ran accross your helpful hint. My first question is Switch? How what where?
I just realized I have a T568 A cat5 cable.
I am guessing this is the problem. I will try it and let you know Thanks.
Colleen
by scott_heath Accepted solution
A network switch is a simple device that allows communication between several PCs at the same time. This enables you to use 4,8, 32 etc PC's together and share data/devices. Using the Cross-Over cable solution you can only ever have 2 PCs communicating with each other. Most homes or small businesses use a router that connects to a cable/dsl modem for internet access. A router is a little like a switch, but it has the ability to transmit your data to a network that the PC itself is not a part of. For instance, your PC's address is 10.1.1.1 and you want to get to www.google.com, which is 216.239.51.99. When the packet of data reaches the router it knows that 216.239.51.99 is not on the local network and that it needs to route the packet to the external network (internet). Routers almost always provide a firewall as well. A firewall keeps unwanted network traffic off of your network.
If you continue to have problem with the cross-over cable you could buy something like this: http://www.walmart.com/catalog/product.do?product_id=2304398
It's cheap and you just plug a cable from each computer into the switch and then configure the computers for the same network. PC1 can be 192.168.0.1, PC 2 can be 192.168.0.2, make the subnet mask for both 255.255.255.0 and leave the gateway blank.
This discussion is closed to new replies.
Trending Software posts
Sort by Trending