Discussion Locked

Network printer

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have two PC's networked together with
a HP 850/855 shared printer.
On the server the printer is local and default,works fine.
But I have been unable to set it on the other PC.
Tells me that is offline and the property
vindow shows "Hp"name ofprinter,instead of
HP Deskjet 850/855

7 replies

by reference

I would check to make sure you have your client set up on both machines (I'm assuming Client for Microsoft Networks) check for File and Printer Sharing to be installed and setup on both machines. we know the printer is 'shared' because of your question about the name being 'HP' -- look at the sharing tab in the printer properties, the share name will be HP, and thats o.k.
also, make sure your using the same protocol between the two (TCP/IP or NetBEUI)
Can you see the printer from the second machine...like through network neighborhood? Maybe a newer driver is needed. more info would help.
Good Luck!!

by volovoy

I agree with answer 1, but for client machine you don't need service File and Print Sharing, you need only the same workgroupname. In Network Neighborhood you can see shared printer with it's shared name. It has nothing to do with it's real name. So, go Start, Settings, Printers, Add printer, next, choose network printer, next, browse your network, find your printer and install it. I have the same printer HP Deskjet 850/855C connected to my computer and everybody from our network can print on this printer. If you need more details e-mail me.
Good luck

by mtatomirov

Try to run driver installation disk on the client machine, specify the local port even if it`s not attached localy, don`t print test page, rebot machine. After machine rebot`s, from the properties of the printer redirect printer from lpt1: (local port) to the specified network port and try to print test page. Ususally it works like this. If you have any further questions, mail me.

This discussion is closed to new replies.