Discussion Locked

networking branches

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have multiple branches around the country each branch is on the same subnet. for example one branch is set to 11.1.0.10 subnet 255.255.0.0 another branch is 11.2.0.01 subnet 255.255.0.0 the the branches are able to access programs but each branchis unable to see the computers at every other branch. The branch that is on the same ip as the server ex: 11.1.0.10 logs into the server but the remote branches on 11.1.1.01 when they put in the username and password they get an error that the server is unavailable or can not locate path to server. how can i set everyone to see each other and log into the network throught frame relay?

6 replies

by gutridgesj

i will assume for a moment that you can ping all the subnet using the IP address? if not, you have a tcp/ip routing problem.

If so, then the problem could be that the netbios names are not being forwarded around by the browser.

if so, try putting an lmhosts file on at least each PDC/BDC at each site and then do a nbtstat -R on each PDC/BDC. Then see if you can ping the servers using the name. if not, you may have to reboot the servers to kickstart the lmhosts file.

by mndthegap1

I forgot to mention that we only have one server for ex on 11.1.0.10 the other subnets do not have a BDC, could that be part of the problem, do i need a BDC at each remote location connected through the frame?

by estebandelatorre

Identifying the problem:
Ping an ip address of other subnet
BAD! -> You have an IP problem, check default gateways, static routes, etc
Good: -> Try ping the machine by it?s host name
BAD! Add machine an ip address to your LMhost file. Windows need how to resolve machine names to ip address...
Good-> So what's your problem instead?

This discussion is closed to new replies.