Question Locked

new LCD, new motherboard, Dell C610

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Okay here is goes, I have been searching for an answer for days now and I could really use some help. I had originally bought a new LCD display for my Dell C610. Dell had my LCD display listed as a SXGA but when I opened it up it was an SVGA and I needed then to buy a new ribbon for the screen to work. Now after I replaced the ribbon and everything worked for two days. Then the coupler on the power strip below the LCD screen came loose and shorted out my motherboard. The company where I bought the new LCD and the ribbon replaced my motherboard with a new one. Now my screen color is really bad and the screen is a lot larger than the LCD screen. I have a Radeon Mobility AGP driver, I am at my whits end and could please use some help.
Dell C610
Windows 2000 professional
512 MB Ram

3 replies

by hal 9000

It sounds very much like you have the wrong one installed. But failing that have you tried going into Display Proprieties and altering the Display Resolution?

That may cure your current problem by altering the display resolution.

Col

by tipptrophy

Thank you so much for your reply I have changed the display resolution, I have tried to download and install a new driver but unfortunatly it is not working. Should I buy a new graphics card? BUT, when I had the new flex ribbon before it broke, with the SXGA lcd display it worked until it shorted out my mother board...would the new
motherboard have a different driver? It says that it is a ATI Mobilty Readon AGP?....
I am still at a loss....

This discussion is closed to new replies.