6 replies
by jamin724 Accepted solution
by the scummy one Accepted solution
maybe some static damage was done, and the HDD is either not being read properly, or it is damaged.
Run the disk check and see if everything can be recovered properly.
by rob miners Accepted solution
1.Turn on (or restart) your computer to enter System Setup.
2.When the blue DELL? logo appears, press < F2 > immediately.
If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft? Windows? desktop. Then shut down your computer and try again.
Let it detect the new memory and save the settings and exit.
Follow the Scummys Ones advice and run chkdsk /r
Dell? Dimension? 3000 Systems Service Manual
http://support.dell.com/support/edocs/systems/dim3000/en/SM/index.htm
Let us know if you need more help.
Edit: formatting
by jgirizarry Accepted solution
by datacommguy Accepted solution
http://downloads.techrepublic.com.com/abstract.aspx?docid=172040&promo=100200
It's a set of 'What do I do now' steps when your PC won't boot.
by oh smeg Accepted solution
You need to open the BIOS and make sure that the correct amount is being shown in the BIOS and then Save the Changes when you exit BIOS.
If you do not do this the System attempts to Map the Old Ram Size tot he New Ram and causes all sorts of problems. Your lucky if the OS will not open as when it does it will crash out at random and drive you crazy.
What you need to do here is remove the RAM and reseat it then power on and press the F2 Key. When the BIOS Opens go to the first screen and check the Actual Installed RAM and then using the Arrow Keys move the Highlighted Tab to the Exit Tab and press Enter> When you are prompted to Save Changes as you exit BIOS press the Enter Key again to save the changes and hopefully provided you haven't done anything tot he Installed Software the system should now start.
Col
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending