3 replies
by iso_snoman Accepted solution
by thechas Accepted solution
Yes, the original release of XP was limited to 132 GB of hard drive.
I don't remember off the top of my head if Service Pack 1 or Service Pack 2 took care of that.
However, NO service pack will allow you to change the size of a partition that you have Windows installed on. Installing the service packs "should" allow drive manager to see and partition the rest of the hard drive.
If you want to have the full capacity of the 500 GB drive for your C: drive, you will need to either "slip-stream" the service packs and your copy of Windows XP onto a new disk. Or, use the drive manufactures utilities to partition and format the disk prior to installing Windows.
There are plenty of articles either here at Tech Republic, or posted everywhere on how to build a slip-stream disk.
Chas
by oh smeg Accepted solution
To do this you can either follow the Directions in this TR Article
http://articles.techrepublic.com.com/5100-10878_11-5630356.html
Download the same TR Article from here
http://downloads.techrepublic.com.com/abstract.aspx?docid=172974
Or use something like nLite available free from here
http://www.nliteos.com/download.html
However if you chose to use nLite make sure to read the Instructions here
If you want to have all of the 500 GIG available as a Boot Drive you need SP2 but if you chose to install the Original XP to the Max Size of 132 GIG you can then after you have applied SP2 enter the Drive Management and create a Second or more Partitions to use the entire HDD Space. ;)
Col
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending