Discussion Locked

NIC card settings in a dual boot system

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have recently installed a second copy of Windows XP on the same Computer on a different partition. I am unsure how I should set up the NIC card in the latest version of WinXP - I have given the computer a different name on each partition but maybe this confuses Windows as I cannot make a connection to the network or to the Internet using a Staic IP address. Obviously the mac address of the NIC is the same for both partitions. Should I be using the same Computer name and the same static IP address regardless of which operating system version I am logging into, or should I be changing 1 or both systems to have a different Computer name and/or IP address.Advice would be very welcome.

2 replies

by ni70

Need info: are you part of a domain, workgroup, or just a home network? I'm not sure why you're dual booting WinXP, I could understand dual booting WinXP and Linux. It is possible that your first copy of WinXP has a static IP address, if that is the case just write down the information or open a command shell and type ipconfig /all then go to top left icon, scroll to edit>select all, then hit enter. Open a text editor such as Notepad or Wordpad, then paste using ctrl+v. Check to see if your IP address is being handled by DHCP.

Reboot to your second WinXP, then check your Network Properties, or using cmd.exe and ipconfig /all. If your IP address begins with 169.x.x.x then you'll need to input your IP address, along with the gateway, DNS, etc. that is listed in your first NIC's network properties.

by wlbowers

You can use the same static address on both partitions.

If you use dhcp the system will see it as the same machine.

Boot to the good copy and open a cmd window. Type ipconfig /all and press enter.

Write down address, subnet, dns and most important gateway.

Now boot to the second and duplicate the settings in network including the gateway.

Reboot and see if this solves the problem.

Lee

This discussion is closed to new replies.