Desktop

Ask something
Discussion Locked

No Display Adapter

0 helpful
9 replies

by tangman41

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I removed my Display Adapter in my Device Manager by accident,now I cant install my video card software.It tells me to install distk labled mach64windows9xdriver.Anyone help a person who built his 1000mhz and has nothing but problems?

9 replies

by tangman41

Tried your suggestion,didnt work.I have the cd but It wont allow me to browse it.I have win98.

by tangman41

I show errors,source file c\win98\ati3dcif.dll destination file c:\windows\system\ati3dcif.dll error#15

by nh

A little hint that may help.Windows 9x could mean 95 or 98.Make sure the driver you have is the correct driver for the relevant version of Windows.I once came across a similar problem so I removed all installed drivers, removed the graphic card,booted the PC but only for a few seconds,switched the PC off again,re-inserted the graphic card which then sent Windows looking for "New Hardware installed" The driver could then be
installed without further errors.

by dcosgrove

look on the cd to see if there is a setup file or something. Sometimes the driver files are compressed and extracted during software installation. If it was working the drivers should be in c:/windows/system, but this is not always the case.

This discussion is closed to new replies.