Software

Ask something
Question Locked

no display after loading video card Driver

0 helpful
3 replies

by neversaydie5

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
after a clean re-install of win XP sp2 i installed the chipset(intel original 945gnt) drivers followed by the graphics card driver(xfx 7300gt 256MB).everything was fine until i installed the gfx card drivers.after that system shows the windows splash screen and the loading bar and then the there is no display,the monitor just blinks.i have done many re-installs but no good.i am able to get into the safe mode.plz help...havnt had a gaming session since three days :(

3 replies

by Former member

You have loaded on the drivers for the on-board grafic display. If you are have installed another grafic card in to a slot on your motherboard then what you are facing is/was a black screen. To solve this issue: Reboot into the bios and look for "on board display" and disable it. (OR) Reboot into safe mode > start > settings > control panel > system > hardware > device manager and scroll down to "display adapters", you might have two or three listed here just delete the two that are related to the on-board grafics or do a update driver (just highlight the text) and select "install from list", you might be asked for the driver disk so have this ready. I hope this helps you, please post back if you have more problems.

This discussion is closed to new replies.