Discussion Locked

No domain controller

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
When changing a NT workstation from DHCP to a static IP address the workstation can not find the domain controller after rebooting. All that is changed is the IP address. Any Ideas?

10 replies

by syscokid

I believe you need to take it out of the domain and put it in a workgroup, then add it back to the domain.

by mangonmd

Is this workstation on a differnet subnet now? Or better yet, is the server and the workstation on the same subnet? If the answer is yes, try to ping the server from the workstation. If that works, follow the first response to this, it should work. F.Y.I. in case you didn't know... if you want to authenticate across a subnet WINS needs to be setup.

by mangonmd

You may need to delete the workstation computer account also in order to re-join the domain. You should see the account in server manager.

by soekratis

Remove the workstation account from the server manager. Make sure to sync the PDC with all the BDCs. Now, go to the workstation and login locally, since you no longer can find the domain. Next, go to Network Properties in the Control Panel and you will see the Identification tab. Click the "Change" button and select the Workgroup instead of Domain. When this is done, close the Control Panel and reboot the system. Login again locally once the system is up and repeat the above steps but this time select the Domain. It will request for a User ID and Password and make sure to user account that is equivalent to Administrator.

One more area to check is the TCP/IP settings. Make sure you have entered a valid IP Address, Subnet and Default Gateway.

Cheers
Soekratis

by @lberto

You have to check two things.

.- Make sure that your workstations has the same subnet mask as your PDC. And of course, I suppouse you gave a fixed TCP/IP address to your PDC as well.

.- If it still doesn't work, then remove your Workstation from the domain, then remove your workstation name from the Server Manager if it is still there (remember you have to wait 2 or 3 minutes for it to update the whole network), now try to join the domain again.

It should work, I hope it helps you,
@lberto

This discussion is closed to new replies.