5 replies
If you are NOT getting your "E:" drive after installing your CDRW then everything is NOT working correctly is it? Check several things: first check to make sure that your jumper settings on your drives are correct. CD Writers generally want to bethe master and should be. If you have it installed on the same IDE channel as your DVD, then check to make sure that one has been jumped to MASTER and one to SLAVE (do not use CS). Also check your CONFIG.SYS file for a LASTDRIVE= line. It really shouldn't be there, using Windows, and if it is, it is generally set to Z (LASTDRIVE=Z). Check your the properties of your device in device manager and make sure that somehow, the assign a drive letter isn't set to conflict or set to some other letter. If all else fails, try removing the DVD and see if you can get the CDRW to work at ALL. If it does, either your jumpers are set incorrectly or your cable is bad.
Good Luck!
640k
by stevcrawf
by jhinrichs
by stevcrawf
by stevcrawf
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending