Discussion Locked

no modem found

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have run across this several times. My modem is setup and working, but my dial up IE software will not find it. I have re-installed to solve this problem. I have had this problem on 98, 95, on different machines.

7 replies

by barmaley

Try to remove modem drivers, dial-up and port all at the same time, and let Windows to reinstall it.

Sometimes it helps. Or try to put modem to different slot.

by kgosnell

I have found that when the system assigns a port for the modem, it occationally loses the info, as the other answer stated , you can remove it and let Windows find it and instal it again and correct it using generic drivers, or find the mixup file that has not recognized the port assignment, on mine the port automatically assigns port 2, and I had to set the specs for the modem, such as speed, also I recall having to set one setting to port 2 to get it to operate, likely it is looking at port 1and that is assigned to printers and such, hence lost modem.
Hope this helps

by franceez

I need to be installing the "componentes de software" to known the modem of the Presario Computer's 4122 whit windows 98. Thank you.

This discussion is closed to new replies.