Discussion Locked
0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
From a windows 98 box to a nt 4.0 server I get my drive mappings however I can see no one in the neighborhood?
11 replies
Check Name resolution.
Is the 98 workgroup the same as the domain name?
by picturethat
Yes it is in the same workgroup and domain. I have made that mistake to many times.
by davis226
If you are not using DHCP to assign WINS, then make sure you have the correct ip address of the WINS server entered in under you TCP/IP protocol settings.
by picturethat
Yes I checked that first, not the issue.
by beefhead
Check if you have the client for Microsoft networks installed?
My 2 cents.
Beef
by picturethat
Yes one of the first things checked, I removed, rebooted then reinstalled. No luck
by amalthuizen
use NetBEUI
by picturethat
Yes I tryed NetBeui, I have seen in the past where this helps, not sure why but did not work in this case.
Add an lmhosts file to the client using the proper #PRE and #DOM entries and the server(s) will show up in Network Neighborhood.
by picturethat
Not sure how to do this can you tell me where this IMHOSTS file should live and how to come up with the proper #PRE and #DOM entryis?
by picturethat
This question was closed by the author
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending
1 helpful
16 replies
0 helpful
13 replies
0 helpful
3 replies
0 helpful
2 replies
Question
Is WSL still relevant in 2026?
0 helpful
1 reply