Discussion Locked

No screen after restarting SBS 2003

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I just installed MS Small Business Server 2003. Everything works well, but after restarting my server something goes wrong... I get the MS Windows Server 2003 logo, but after that my screen remains black... No start screen appears after waiting for several hours

3 replies

by ricky

Been there - seen that :-D

1. Check that your system is booting-up or hanging before booting up. Do the disk lights continue to blink (when there's no display)? If so, Ok - your system is booting-up, but has got it's video driver confused and can't display anything on the screen.
In such a case, press F8 while booting-up, go to safe mode and remove (Yes, completely remove) the video (display) driver and re-start your system.
It'll ask for the driver again on start-up and things should be fine.

2. If your system's not booting-up at all - just hanging at boot-up (hence the black screen), I'd recommend a re-install. Something's gone wrong and it hasn't installed the OS Properly.

3. You can also put the original install CD in, re-boot from the CD Drive and ask it to check-fix the current installation. Instead of doing a full re-install. Read the start-up screens when the system boots from the install CD - it's easy to miss this option.

HTH.

by longennamer

been there...seen that too

for me it was my old monitor not liking the new video settings. stuck new monitor on long enough to get booted up and bumped video setting lower.

by yvo

Thanks, for the reply! It was the video driver what caused the system the hang... THNX!

This discussion is closed to new replies.