Discussion Locked

No serial mouse detected in Win98 SE

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a PC with 2 serial ports and in Windows 98 FE and Windows 2000 I can use a serial mouse with no problems, but when using Windows 98 SE I can't get this to work. I checked out Microsoft's site for this problem and there are known problems with windows 98 and a serial mouse. I have a PS2 mouse already installed but I need the Serial mouse installed also. So if anybudy knows a fix for this problem, Thanks...

9 replies

by shanghai sam

Well not sure how you setup your machine.. are you saying that you have a PC with 2000 and win98 installed..(meaning dual boot.?)
1, if i'm not mistaken, having a PS2 and serial mouse working together is not heard of( i might be wrong ).
2, make sure that the serial mouse is on com1..and com1 is enabled(check the bios) and configured right..
*hope this helps

by mikey_tech_support

I have about 250 PC that use a serial mouse connector for use with a mobile projector. The Mobile project has a remote, the projector connects to the serial port to control the mouse. there is no dual boot. but when using these projectors with W2k or win98FE they work fine but with win98SE thats not the case.

by braveh4rt

Try to remove the ps/2 mouse and then log off/ restart.
in win FE the mouse can't be have two type installed in the same time. So you must use one of them or you won't be able to use them.
Use the ps/2 mouse or serial mouse..

Thanks
hope help you

by mzy

Two mouse cannot be installed together in one system of Win98 SE. If you want install the two mouse together, none will work, as they will have conflicts, which may even stall the computer.

One way is to uninstall the other mouse and install the serial mouse. Another way is not even use the serial mouse at all.

Hope this helps, Maozy

by jolly roger

I didn't get the feeling you were trying to make 2 "mouses" work at the same time but if you did, I have had a PS2 mouse and a USB mouse working at the same time using WIN98SE.

by mikey_tech_support

After troubleshooting the hardware setup, I had to download a DOS driver from Microsoft "msmouse.exe", place the EXE in the Autoexec.bat, click on Communication Ports "com2" and set the flow control to Hardware, then reboot and watch the driverload and find the mouse on com2 in DOS. The run add new hardware and let it search for the new hardware and if I got a button labeled details, Then the mouse works fine.

This discussion is closed to new replies.