Discussion Locked

No sound from recorded Audio CDs

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

When I create audio CDs from MP3 files with a Ricoh MP9060 drive and Easy CD Creator, the recording session is successful, but when attempting to play the disc, I receive a "Data or no disc loaded" message from Windows' CD Player or any other CD player software at a recording speed of 6x or 4x. If I record at 1x or 2x, the CD is recognized as an audio CD, and everything appears normal EXCEPT that when played, there is no sound. I am always below the capacity of the disk according to the usagebar at the bottom of the window. I can create data CDs with no problems. I follow the instructions in the software, but I have not been able to create a usable audio CD. I upgraded the software from version 4.01 to 4.05 according to the instructions on the Roxio web site with no change in results. What am I missing? Am I doing something wrong? Is there a limit to the number of tracks that can be recorded? Is the actual capacity below what the capacity used indicator shows? What procedure should be used? Any information would be helpful. HELP!!

OS: Microsoft Windows 98SE
Motherboard: FIC PA-2013 w/ 2MB cache
Processor: AMD K6-2/550
Memory: 256MB
Recorder: Ricoh MP9060 DVD/CD-RW drive
Software: Easy CD Creator 4.01 or 4.05 Create Option: Test and Create CD
Write Method: Track-At-Once/Close CD
Write Speed: 1x or 2x
Media: Maxell CD-R 650MB
Source audio format: MP3

3 replies

by mike (from canada)

Try any or all of the following:

* Clean your CD
* Plug in your speakers
* Replace your speakers (cord might be chewed?)
* Get different disk or recorder
* Check inside to see if anything is abnormal

by latlow

*Drive has been cleaned
*Speakers work fine for other sounds and prerecorded audio CDs
*Disks work okay for data CDs and duplicating audio CDs
*Drive works fine for playback and recording of all other types.

This discussion is closed to new replies.