Discussion Locked

No sound from recorded Audio CDs

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

When I create audio CDs from .MP3 files with a Ricoh MP9060 drive at 1x or 2x speed using Easy CD Creator, the recording session is successful, but when attempting to play the disc, with ANY CD player software there is no sound. The CD is recognizedas an audio CD, and everything appears normal EXCEPT that when played, there is no sound. Playback is fine for audio files, prerecorded audio CDs, recorded CDs from other system. I am always below the capacity of the disk according to the usage barat the bottom of the window. I can create data CDs with no problems. I follow the instructions in the software, but I have not been able to create a usable audio CD. I upgraded the software from version 4.01 to 4.05 according to the instructions on the Roxio web site with no change in results. What am I missing? Am I doing something wrong? Is there a limit to the number of tracks that can be recorded? Is the actual capacity below what the capacity used indicator shows? What procedure should be used? Any information would be helpful. HELP!!

OS: Microsoft Windows 98SE
Motherboard: FIC PA-2013 w/ 2MB cache
Processor: AMD K6-2/550
Memory: 256MB
Recorder: Ricoh MP9060 DVD/CD-RW drive
Software: Easy CD Creator 4.01 or 4.05
CreateOption: Test and Create CD
Write Method: Track-At-Once/Close CD
Write Speed: 1x or 2x
Media: Maxell CD-R 650MB
Source audio format: MP3

9 replies

by sf48

Does the system play pre-rec CD's ok? If not then check your connections between the cd drive and the sound card. If you use digital audio extraction then check your mixer settings.

by latlow

... Playback is fine for audio files, prerecorded audio CDs, recorded CDs from other system. ...

by ebob

There are a couple of things I would check:

1 - Does the PC play "other" audio CDs? Your previous answer says "yes" which suggests that the usual problem (no audio cable from CD to sound card) is not the problem.

2 - Can you play the CDs you create on "other" devices? If you're making MP3 CDs, as you suggest, then of course, you will need to find a player that can handle MP3 format. Maybe you have a friend with a player, or a PC...?

3 - Assuming that your "normal" CDs are loaded with MP3s, can you create "regular audio" CDs? And can you play these on your PC? And can you play these on "other" audio devices?

4 - Can you create "data" CDs? And do these "work"?

These last 3 tests are just to determine if your CD-Writer is really working. It sounds pretty suspect.

by chainsawz

You might try converting your mp3 files to .wav files, and burn those to the cd. Your cd burning software should have that option available - if not, there are freeware programs on the net you can use.

Good luck!!

by karma1

Hey...

My answer is very similar to the one b4 this. However, I've made many Audio CD's from MP3s, and I'll tell you how to do it.

1: I use WinAMp to MP3's on my system. In the preferences of WinAmp, under Output, there is a Plug-In called Disk Writer. When you select this, it'll ask you where it should store the WAV files. Give it a dir.
(Make sure you turn off shuffle and random)
2: In EasyCD Creator, open the Audio CD layout, add the WAV files as the Audio tracks. Burn the CD. (I ususally create the whole CD at one time, so I also use Disc-At-Once)
3: Make sure you change back to Direct-Wave-Out in WinAmp. Otherwise instead of listening to MP3's, you'll be making WAV files. :)

This is a tried and proven method. Good luck. The reason your 'Burned' audio CD's may not work is because a) you didn't close the disc or b) The program may have removed the volume from the Audio tracks.

Good luck.

This discussion is closed to new replies.