SYMPTOMS
========
When you press the INSERT (INS) key on the keyboard, the typing mode does not
switch from insert to overtype or vice versa.
CAUSE
=====
By default, this key is not assigned to switch between overtype and insert mode.
RESOLUTION
==========
To correct this problem in Windows, install Microsoft Word 97 Service Release 1
(SR-1).
To work around this problem, use the method appropriate for your situation.
Method 1: Assigning the Overtype Command to aShortcut Key
----------------------------------------------------------
To activate the INSERT key, do the following:
1. On the Tools menu, click Customize, and then click the Commands tab.
2. Click the Keyboard button.
3. In the Categories box, select All Commands.
4. In the Commands list, select Overtype.
5. Position the insertion point in the "Press New Shortcut Key" box, and then
press the INSERT key on the keyboard.
NOTE: If the keys you press are alreadyassigned to a different command, Word
will indicate the assignment with a message below the "Press New Shortcut
Key" box, similar to the following message:
Currently assigned to:
6. Click the Assign button.
7. Click the Close button.
NOTE: OVR appears unavailable (dimmed) when overtype mode is off.
Method 2: Select the Overtype Option
------------------------------------
1. On the Tools menu, click Options, and then click the Edit tab.
2. Under Editing Options, clear or select the Overtype Mode check box.
Method 3: Use the Status Bar
----------------------------
With the status bar displayed, double-click OVR. This method sets the typing mode
for the current session only.
Method4: Use a Macro to Switch Between Overtype and Insert Modes
-----------------------------------------------------------------
Create the following Visual Basic for Applications